You are here: HomeAirbag Resetting

Airbag (ECU) Resetting Service
pcb

AutoArm NE are now able to repair, reprogram your faulty/activated airbag control module, Sometimes called SRS, ECU, Brain.

Standard diagnostic tools WILL NOT clear the crash data from your airbag control unit (ECU). Even if you have not had a accident and for whatever reason your vehicle indicates an airbag system fault then this can be a internal airbag control unit error.
PLEASE SEE OUR NEW WEBSITE FOR AIRBAG RESETS.

If your car airbag system has any of the following symptoms then we may be able to help:    

     *  If your diagnostic tool is reading DTC 65535, CRASH DATA STORED or ECU ERROR    
    * You have Airbag errors due to a discharged or flat battery and/or by jump starting attempts.
    * If your airbag light on or flashing.
    * If your airbags have deployed
We clear both the fault and crash codes so that you can re-use your original airbag control module as if it were a new unit. We can certainly help you to save ££'s!
Even if you buy a new module you will have pay for both the module and to have it recoded to your vehicle. If we clear/reset your module, in most cases, you will be able to use it in the original vehicle without the need for recoding.
Air bag modules are designed to only work once. We can clear the existing crash/error data so that they can be used again.		 peugeot-airbag

They will function as new, erasing the crash data will cost you a fraction of the cost of a new unit.

If your air bags have deployed then obviously they need to be replaced with un-deployed air bags but the original airbag ECU can now be repaired and cleared of all its crash data.

Dealerships, using diagnostic tools can clear simple airbag fault or error codes from your airbag ECU, but not the crash codes. We can clear these codes for you allowing you to save hundreds of pounds on your vehicle repair bill!

Your module will be sent back as if you had bought a new one. And will work in exactly the same way as the original one. You will not have to recode the module to the vehicle you removed it from. It will be like the accident never happened!

Please make sure it is your module that is at error, and that all airbags, tensioners and all related components have been replaced or verified as functioning correctly by a qualified technician.

Most makes and models are repairable, a few examples where they obviously may not be repairable is:

a module from a flood damage vehicle or where the airbag ECU has been crushed.

We can repair almost every airbag module (control unit or ECU).

 

PLEASE SEE OUR NEW WEBSITE FOR AIRBAG RESETS.

Crash Data Reset

 

 

 

Go to top